Keep intruders at bay and watch over your property regardless of weather conditions with the USA-made-and-assembled Esprit Enhanced Series ES6230-12US 1080p Outdoor PTZ Network Box Camera with Wiper from Pelco. Featuring a 1/2.8" CMOS sensor and a f/1.6-4.7mm 30x varifocal lens, this camera captures video at resolutions up to 1920 x 1080 at 60 fps in horizontal fields of view ranging from 63.7 to 2.3°. The camera delivers color images down to 0.008 lux at 250 ms, below which an integrated IR cut filter switches to B&W for ultra-low-light vision down to 0.001 lux. Moreover, the camera incorporates a high-speed pan/tilt system, allowing for 360° continuous panning and -90 to 40° tilting at up to 140° per second.
The ES6230-12US has an SD slot for edge storage and an audio input for connecting a separately available external microphone. H.264 and MJPEG configurable streams allow you to optimize storage and bandwidth use, while HPoE enables you to run just one wire for both data and power. ONVIF compliance ensures compatibility with a wide range of surveillance equipment.
Integrated window wiper with configurable delay and shut-off modes
Wiper design allows for easy replacement of wiper blade
Built-in heater, window defroster/defogger, and sun shroud
30x optical zoom
Surevision 3.0 technology
130 dB wide dynamic range (WDR)
Color vision down to 0.03 lux at 33ms and down to 0.008 lux at 250 ms
Anti-bloom technology
3D noise filtering
Enhanced tone mapping
Maximum 1080p resolution at up to 60 fps video
32 privacy masking zones
Defog mode provides three levels of fog removal within the frame for improved image quality during foggy or rainy weather conditions
Vivid mode can be turned on/off to drastically improve contrast and color saturation
Built-in video analytics with nine user-configurable behaviors (up to three can be run simultaneously): Abandoned object, adaptive motion detection, AutoTracker, camera sabotage, directional motion, loitering detection, object counting, object removal, and stopped vehicle
Electronic image stabilization (EIS) to reduce impact of vibration on image quality
Various white balance modes for handling difficult lighting conditions caused by external sources such as sodium vapor lamps
High-speed pan/tilt mechanics
Integrated optics package (IOP)
Dual-stream H.264 smart compression
16 preset tours, 256 presets, 32 window blanks, 8 patterns, and 8 scans
ONVIF Profiles S, G, and Q compliant
360° continuous pan rotation at up to 140° per second
SFP port
Powder-coated, aluminum enclosure with stainless steel hardware
IP66 rated for outdoor use
Absolute operating temperature range of -50 to 140°F; within two hours after power-up, the unit can de-ice and be operational from a temperature of -13°F
Integrates with Pelco IP and hybrid video systems such as VideoXpert, Endura 2.0 (or later), Digital Sentry 7.3 (or later), and Digital Sentry NVS
HPoE, DC, or AC powered
Universal mains power supply included
Power-up recovery mode allows user to specify what operation the system will resume whenever the power is cycled
Open collector auxiliary output for controlling external devices